RE: [TCML] Bipolar Tesla Coil Designing

["Dr.Hankenstein" <dr.hankenstein@xxxxxxxxxxxxx>]

Cole,

There is some information on bipolar vs. monopolar about halfway through
this article you may find helpful. Several secondary coils were modeled for
the final result of figuring out the fundamental Fo. Coils ranging from 4"
to 12" diameter were "swept" to find the Fo. Seems like the Fo is usually
about 1.4 times higher than the same coil with only one top load. Read the
paragraph for more details. Normally the "current method" is used to sweep a
monopolar coil. In the case of bipolar, the "voltage method" must be used.

http://audiotesla.org/mini%20mosfet.htm

Hank 


Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Cole Awesome-Jordan
Sent: Saturday, July 02, 2011 6:49 AM
To: tesla list
Subject: [TCML] Bipolar Tesla Coil Designing

Hello everyone, I have been looking through the archives and I have  
not been able to find anything on a bipolar tesla coil designing  
process. Does anyone have a link or plans that I could use as a base?

Thanks

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla