[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] X-ray Transformer for Sale



Hi Bayley,

The X-ray transformer is a Toshiba High-Potential Transformer, Model 30826-2. It comes with all four silicon rectifier blocks and I think it weighs over 300 pounds wet. It was built in 1977 and I have tested it for PCBs. It can be powered with 120 or 240 VAC and can put out 125kV peak. I have only the transformer. However, FYI, the control console WAS a Toshiba Model 30861-2.

Hal from Tucson

----- Original Message ----- From: "Bayley Wang" <wang9xb17@xxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Saturday, January 15, 2011 6:40 PM
Subject: Re: [TCML] X-ray Transformer for Sale


What are the transformer's specs and how much does it weigh?

On Sat, Jan 15, 2011 at 8:26 PM, Hal Krohn <2halice@xxxxxxx> wrote:

I have an Xray transformer that I got from a chiropractor who was
upgrading.  I don't have the control panel for it but I do have the
schematics. I'll sell it for any reasonable offer but will not ship it. It
is sitting in Tucson, AZ.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla