[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] RE: ARSG help

To: Telsa Pupman <tesla@xxxxxxxxxx>
Subject: [TCML] RE: ARSG help
From: Etienne Dreyer <chemistets@xxxxxxxxxxx>
Date: Sun, 20 Feb 2011 15:45:08 -0800
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
In-reply-to: <20110220190003.087BE10E6EC@xxxxxxxxxxxxxxxx>
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
References: <20110220190003.087BE10E6EC@xxxxxxxxxxxxxxxx>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hi all,
I wan't to upgrade my dual mot (volt doubled) powered coil to run off a ARSG, but I don't really know what rpms or frequency and whatever else I should be looking for. Should I hook the motor up to a light dimmer or somthing to vary the bps freq. or what? My capacitance is 45nF @ 20kV, and my mots give me around 12kV, 60Hz DC pulses.
Thanks for advice,
Etienne

 
 		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- [TCML] Re: ARSG help
  - From: Andrew Robinson

Prev by Date: Re: [TCML] video 'lert: Mad Electrcity, History Channel, 8PM EST 18Feb (etc)
Next by Date: [TCML] Re: ARSG help
Previous by thread: Re: [TCML] RSG Electrical Connections
Next by thread: [TCML] Re: ARSG help
Index(es):
- Date
- Thread