RE: [TCML] New photos of 6 inch coil

["Craig" <cdumey@xxxxxxxxxxx>]

Thanks for the comments. Yes, it is custom made from copper tubing. Took a bit of time.

Craig

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of jhowson4@xxxxxxxxxxx
Sent: Friday, August 26, 2011 10:23 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] New photos of 6 inch coil

That looks fantastic! I especially love the orange acrylic covering the primary . =) 

Is that primary tap piece custom made? Not the whole assembly but just the nice curved contactor bit. 

Thanks, 
John "Jay" Howson IV 

----- Original Message -----
From: "Craig" <cdumey@xxxxxxxxxxx> 
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx> 
Sent: Friday, August 26, 2011 4:48:19 PM 
Subject: [TCML] New photos of 6 inch coil 

I have some new photos of additions to my coil. There are 40 or so new 
pictures at the bottom of the album. Thought I would share. Still haven't 
had an opportunity to run the coil in an area with sufficient space. 



https://picasaweb.google.com/109604889970826801245/TeslaCoil?authuser=0&feat 
=directlink 



Craig 



_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla