[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Resistors

That would work, provided that the caps are a suitable variety, i.e.
polypropylene dielectric.

It appears that you're targeting the mains-resonant cap value of .0061uF.
While that will work, it increases the danger of over-volting the
transformer and cap should the gaps be set too widely.  A cap value of 1.5 -
2X the mains-resonant value is typically used.

Regards, Gary Lau
MA, USA

On Fri, Apr 15, 2011 at 9:10 PM, Cole Awesome-Jordan <
jordancole@xxxxxxxxxxxxxxxxxxx> wrote:

> Could one use 1/2 watt 10M resistors with a 10000v 23ma transformer with a
> single strand of 32 .22uF 450v capacitors?
>
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla