[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] coil out put?
--- On Sat, 9/25/10, Mike Doyle <mdoyleufo@xxxxxxxxx> wrote:
> From: Mike Doyle <mdoyleufo@xxxxxxxxx>
> Subject: [TCML] coil out put?
> To: tesla@xxxxxxxxxx
> Date: Saturday, September 25, 2010, 3:33 PM
> i put together a small tesla
> coil,recently,and needed,a few questions answered.
> dimensions: 24 in. by 5in. secondary
>
>
>
> wound with 850 turns 24
>
>
>
> gauge magnet wire
>
>
>
>
>
>
>
> primary: 9 turns ,10awg
>
>
>
> tight wound,pancake
>
>
>
>
> power: 1,7500/120
>
>
>
> neon tr.
>
>
>
>
>
>
>
> cap: .025/20,000v.
> output : 18in. - 24in. streamers,tuned. / 1,15in. by 5 in
> torroid. single tungsten gap/with fan. how can i get more
> ,longer streamers? i also put chokes,on tranny./ 18 ga.5inch
> 100 turns. i filled choke tubes with iron fillings.any
> comments will be appreciated. mdoyleufo@xxxxxxxxx
>
>
So the primary is closewound 10AWG? How do you tune it?
Do you have a photo link to share?
Cheers,
Gregory R. Hunter
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla