Re: [TCML] Need Information - Small NST powered coil

["McCauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>]

Excellent.  That’s good information.
For a small minicoil that’s about 12" high, check out the minicoils which were done by several members here on the TCML say about 6-7 years ago.

The original minicoil was done by Gary Laus using a 4kV/38mA open frame NST.
His version can be found at:
http://mysite.verizon.net/laushaus/tesla/


My version of the same NST powered coil can be found here.  (Schematic anyways)
http://www.easternvoltageresearch.com/resources/minicoil_fullschematic.pdf

This should definitely point you in the right direction.  Hardest part for these designs would be getting the open frame NST as Franceformer has discontinued them I think.  

Dan
http://www.easternvoltageresearch.com
DRSSTC Kits, Audio Modulation, Class-E Plasma Speaker Kits





Dan I purchased a pamplet 7, or 8 years ago that cast $7.00 or $8.00. It was not solid state. It had eight or ten schematic drawings of AC and DC units.
I have very little knowledge on the subject, and think the best way to get started is reading about the subject, see some simple designs (schematic) and make a small unit about 12" high.....Thank you




> I have been reading messages on this site for some time while involved in other projects. I could not do anything with the coil for I had no place to work on it. Now I am ready to start building my first coil. I need a good book to start with that would show diagrams of how the coil is designed, etc.
> Anyone please advise...

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla