[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Consensus on HV cable



David

What is output voltage of pole pig?
What is size of tank capacitor?

Ichg ~ w * C * E  (w= 2*pi*f; 377);  C farads, E volts, Ichg amps
Ichg is approximate steady state VAR current

 Would size wire to support minimum 2X that value
 (see NEC table 310-16 for typical conductor
  ampacities).

Typical #16 is good for 7.5A continuous which at
12kV is nearly 90kVA delivery to load; insulation
to support applied voltage.

Regards

On Mon, Sep 13, 2010 at 11:49 PM, David Speck <Dave@xxxxxxxxxxxxxxxx> wrote:
>  Esteemed list:
>
> Is there any consensus on the optimum gauge and insulation of the cable that
> goes from the HV output terminals of a 10 KVA pole pig to the RSG and tank
> cap of a 12" x 48" Coil?
>
> I seem to recall that the inner conductor of RG-8 coax with solid
> polyethylene jacket and without the shield was the preferred material.
>
> Anyone found anything better?
>
> Thanks,
> Dave
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>



-- 
Dave Sharpe, TCBOR/HEAS
Chesterfield, VA USA

Sharpe's Axiom of Murphy's Law
"Physics trumps opinion!"
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla