RE: [TCML] Coil V4 fail (additional)

["Phil Tuck" <phil@xxxxxxxxxxx>]

John,
Yes, I think he has 173nF  @ 80Kv rating (Two .367mF caps in series @ 40Kv )
That is still a lot smaller than 240nF. His SRSG is large enough though to
handle things, and he has the choice of one or two pigs to drive it. 
(I hasten to add all specs are based on one his YouTube vids where he gives
a guided tour.)
 

Regards
Phil

www.hvtesla.com

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Futuret
Sent: 23 October 2010 02:26
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] Coil V4 fail (additional)

Speaking of big coils with synchronous rotary gaps, Kevin Eldredge's Biggg
coil uses a synch rotary and a somewhat large cap value.
He runs at 120 bps and gets about 26 foot sparks I guess.  The last I heard
he was using 1/2" diameter brass electrodes on the rotary.  

John

 


 

 

-----Original Message-----
From: Teslalabor <teslalabor@xxxxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Fri, Oct 22, 2010 5:21 pm
Subject: Re: [TCML] Coil V4 fail (additional)


Phil,

thank you, thats quite a very good link to Richies post about the resonant 

charging design!



 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla