Re: [TCML] Coil V5 - first light

[DC Cox <resonance@xxxxxxxxxxxx>]

We apply at only 75 F or above.    Like auto painting which is usually done
at 80 F.

DC





On Fri, Oct 22, 2010 at 7:18 PM, Joe Mastroianni <joe@xxxxxxxxxxxxxx> wrote:

> http://yfrog.com/n2rrfj
>
> 8.5" x 34" secondary.  919 turns of heavy build 20ga.  6" x 24" toroid
> Using the same dreaded ribbon primary because I didn't want to have to
> build a new one yet.  Spacing between the top of the ribbon and the first
> turn of the secondary is 3.75".  k=0.09 calculated (not yet measured).
>  ARSG.  Pig running at about 30A.
> Sparks seem to be in the 6-7' range, but have yet to mount the larger
> toroid I'm working on.
>
> Basically, needed to replace my 6.25"x24" secondary that burned last
> weekend.
>
> Problem with this secondary is that the Dolphs bubbled up on me.  It went
> on w/o bubbles, and they emerged later.   I coated all week, at least 1 coat
> per day.   Could it have happened because it is much colder out then when I
> wound my prior secondaries?
>
> Cheers,
> Joe_______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla