Re: [TCML] Terry Filte -r nst to MOTs

["Dan Casaregola" <ag2z@xxxxxxxxxxx>]

Well, with your set-up, you have to immerse them in oil, but I'm only using 
two in series feeding a voltage doubler.  I get 10 kv before spark. and I 
really don't want to go any further.  I'm using two other MOTs in place of 
power resistors.  Enjoy your coil Ted.   Dan in Calif.
----- Original Message ----- 
From: "Tesla" <tesla@xxxxxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Tuesday, November 30, 2010 1:09 AM
Subject: Re: [TCML] Terry Filte -r nst to MOTs


> With 6 MOT's  using 3 per side center ground outer two of each side in oil 
> to full wave bridge and DC system running outer 2 of each side in xfrmr 
> oil, works well with NO Terry filter or other Low pass filter
>
> Runs over 10kVa in short runs
> Ted in NZ
>
> > > Hi,
> > > Are you imersing your MOTS in oil?
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla