[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] party cup capacitors



...here I go again,
 
          My Rolled ( TCBOR caps ) worked well through the years,....if carefully done, they hold up well,...but that was back in the early 1990's,....I would do MMC's now , but my rolled caps are still in service :-)
 

 
> From: jpeakall@xxxxxxxxxxxx
> To: tesla@xxxxxxxxxx
> Subject: Re: [TCML] party cup capacitors
> Date: Tue, 2 Nov 2010 15:45:47 -0700
> 
> For my money, the only DIY caps worth building are salt water caps. Lossy 
> and heavy yes, but can be quite tough and cheap. All of my efforts in other 
> types, rolled, plate, etc never lasted and always left a mess to clean up. 
> The SW caps you can dump and recycle.
> 
> Jonathan
>  		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla