Re: [TCML] Looking for 19lbs of 21 or 22 AWG

[Tyler Pauly <rpggod714@xxxxxxxxx>]

When I needed a 25 lb continuous spool of 18 AWG, I talked to Fay Wire (since bought by EIS.)  They were easy to work with and priced very competitively.  If you can't find a supplier, I would suggest checking with them.

-Tyler



----- Original Message ----
From: Thomas Schmit <Thomas.Schmit@xxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Fri, May 7, 2010 8:10:35 PM
Subject: RE: [TCML] Looking for 19lbs of 21 or 22 AWG

I ran into a similar problem which prompted my question regarding splicing your secondary. There are some pretty good deals on magnet wire on ebay. The only trouble is, about the biggest spool I've seen is 11 lbs. So you may have to buy two spools and splice them together to get the total length you want.



________________________________

From: tesla-bounces@xxxxxxxxxx on behalf of Ian Charnas
Sent: Fri 5/7/2010 6:23 PM
To: tesla@xxxxxxxxxx
Subject: [TCML] Looking for 19lbs of 21 or 22 AWG



Oh Wonderful Pupman list, here in cloudy Cleveland we are in dire (oh
so dire!) need of a spool of 21 or 22 AWG wire for a new secondary.
If you have such suitable wire, we would love to purchase it from you
at a reasonable rate.  Please call or write as soon as possible!

Ian
ian.charnas@xxxxxxxxx
(216) 402-4994
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla



      
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla