[TCML] Terry Filter Perf Board

[Wm A Tickhill <wtickhill@xxxxxxxxx>]

Dear Gadget Guru's

 After Completing My First Basic Coil ( 9k/30 ), I Have Started Building A
BIGGER More Involved ( 15/60 ) Coil.
 While Assembling My Terry Filter It Occurred To Me That The Perfboard I
Used ( the kind with little copper pads at each hole ) Might Have Been A
Mistake. Will The Little Copper Pads Arc Across Like So Many Little Spark
Gaps?
 Any Guidance Is Welcome.

Thanks, Hairball :)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla