RE: working with tubing....Re: [TCML] Flat Spiral Primary

["Weinhold Shannon L" <Shannon.L.Weinhold@xxxxxxxxxxxxxxx>]

Well that's simply brilliant. 
Thanks for bringing it to the table. 


Shannon Weinhold
KII

-----Original Message-----
From: davep@xxxxxxxx [mailto:davep@xxxxxxxx] 
Sent: Monday, March 22, 2010 11:44 PM
To: Tesla Coil Mailing List
Subject: working with tubing....Re: [TCML] Flat Spiral Primary


> I've also used acrylic with good luck to hold the tubing.
   Dunno if this:
     has been mentioned, or
     is relavant, or
     is generally known.

   Not strictly to the original thread.

   Read someplace a technique of forming tubing, to avoid crushing
   kinking:
   fill it with sand: which will allow the tube to form, while
   reducing kinking/crushing.  How (or if?) to remove sand afterwards
   is left to the imagination...

    Never had occaision to try this...

    best
     dwp


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla