[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] First Tesla Coil Problems and Questions



Hi Tai,

You said you just installed a ground rod for your coil? Standard 8' real ground rid right, not just a 10' copper pipe? Anyway, I'll need to be installing one of my own here real shortly. Just a 10lbs sledge hammer and a bit of elbow grease I assume?

I think someone on the list already suggested attaching a garden hose to the end if the pipe, but that's what I'm going to use. I got some real dry soil here in Arizona, so I think I'll leave the hose fitting on so I can moisten up the dirt (maybe) prior to running my coil. Think this could work? Or would the dirt packed around the tip just not let the water do anything?

Thanks,
Brandon


On Mar 1, 2010, at 11:25 PM, tai o <taimaster2005@xxxxxxxxx> wrote:

Hi Norm,


I would like to add another few turns but I simply don't have enough room on my setup to do so. JavaTC shows that the coil is tuned at 7.5 turns but it seems to do better at 8. I can add about another 0.8 turn to make 8.8 turns max but it would require remaking the pvc holders for the primary (which was a big pita) and purchasing more copper tubing. Even then it still wouldn't guarantee better performance and it may be not worth the extra effort. Thanks for the suggestion though. As of right now, I'm pleased with the performance and that it works reliably. I installed a ground rod today and that seemed to lengthen the sparks a little. I'm getting on average about 2ft streamers and the max i've seen is 2.5ft.

-Tai



________________________________
From: Norman Stepp <ndsteppii@xxxxxxxxx>
To: tesla@xxxxxxxxxx
Sent: Mon, March 1, 2010 4:15:36 PM
Subject: Re:[TCML] First Tesla Coil Problems and Questions

Tai,
since you are maxed out on turn 8 w/ the best performance yet,
maybe if you add a couple of turns to your primary you would get
even better performance on say turn 9 (maybe). It's defiantly
worth a shot, worst case you would have a couple of more turns
to experiment w/ different top load sizes. Looking good so far.
Norm
Demotte, IN




_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla




_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla