[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TCML] Fwd: Tesla post from herwig.roscher@xxxxxx requires approval (fwd)
Forwarded for Herwig. Apologies in advance for messed up formatting.
Chip
---------- Forwarded message ----------
Date: Thu, 3 Jun 2010 09:25:35 -0600
From: Chip Atkinson <catkinson@xxxxxxxxxxxxxx>
To: chip@xxxxxxxxxx
Subject: Fwd: Tesla post from herwig.roscher@xxxxxx requires approval (fwd)
---------- Forwarded message ----------
From: Chip Atkinson <chip@xxxxxxxxxx>
Date: Thu, Jun 3, 2010 at 9:18 AM
Subject: Tesla post from herwig.roscher@xxxxxx requires approval (fwd)
To: catkinson@xxxxxxxxxxxxxx
---------- Forwarded message ----------
Date: Thu, 03 Jun 2010 09:14:10 -0600
From: tesla-owner@xxxxxxxxxx
To: tesla-owner@xxxxxxxxxx
Subject: Tesla post from herwig.roscher@xxxxxx requires approval
As list administrator, your authorization is requested for the
following mailing list posting:
List: Tesla@xxxxxxxxxx
From: herwig.roscher@xxxxxx
Subject: SSTC half bridge
Reason: Post to moderated list
At your convenience, visit:
http://www.pupman.com/mailman/admindb/tesla
to approve or deny the request.
---------- Forwarded message ----------
From: "Herwig Roscher" <herwig.roscher@xxxxxx>
To: tesla@xxxxxxxxxx
Date: Thu, 03 Jun 2010 17:14:08 +0200
Subject: SSTC half bridge
Hello,
I am planning on building a SSTC, driven by a half bridge of POWERMOSFETs.
Searching the archives and the web, I found two topologies:
a. +340 V
|
upper FET
|
*------ primary coil--------------
| |
lower FET = dc blocking
capacitor
| |
GND GND
b. +340 V
|
*------------------------------------
| |
upper FET = dc blocking
capacitor
| |
*------ primary coil-------------*
| |
lower FET = dc blocking
capacitor
| |
GND GND
What are the pros and cons for these circuits? Could somebody please
enlighten me?
Regards,
Herwig
---------- Forwarded message ----------
From: tesla-request@xxxxxxxxxx
To:
Date:
Subject: confirm 2b86bc286dbcc63cbc7627d1a2ef11020d61a8a4
If you reply to this message, keeping the Subject: header intact,
Mailman will discard the held message. Do this if the message is
spam. If you reply to this message and include an Approved: header
with the list password in it, the message will be approved for posting
to the list. The Approved: header can also appear in the first line
of the body of the reply.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla