Re: [TCML] Begining Tesla Coil Project

[juliustc81@xxxxxxxxx]

Hey scott that'll be perfect...I'm tryna save money and time...this only gonna be used couple times for a grad project. Thanks
Sent via BlackBerry by AT&T

-----Original Message-----
From: Scott Bogard <sdbogard@xxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx
Date: Sat, 24 Jul 2010 17:08:06 
To: Tesla Coil Mailing List<tesla@xxxxxxxxxx>
Reply-To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Begining Tesla Coil Project

You never really need a Terry filter, it is just insurance, I've never 
used one.  Just be ready to pay the price if something dies (which is 
not too unbearable if your caps and transformers are cheap.)  I'd 
recommend downloading TeslaMap for sizing your stuff up correctly, it is 
free and is a small download (hmm, it seems it isn't free anymore) and 
is easier to understand than JAVATC which is much more thorough but 
intimidating to a complete newbie.  But rule of thumbs,
1000-1500 turns secondary
4.5/1 height to diameter ratio (so for 3-in diameter you want 13.5 
inches of windings)
use multi segment gaps with a little airflow, or a single gap with much 
more airflow,
gap width doesn't exceed the distance the xformer can ignite an arc by 
more than a tiny tiny bit.
if you use homemade caps insulate them.
If you want a more detailed document I can send you one and give 
recommendations for a 6/60 NST, just shoot me an e-mail

Scott Bogard

On 7/24/2010 3:59 PM, Julius Crummer wrote:
> Oh ok cool...so do i really need to have a Terry Filter for this size coil?
>
>
>
>
>
> ________________________________
> From: jimlux<jimlux@xxxxxxxxxxxxx>
> To: Tesla Coil Mailing List<tesla@xxxxxxxxxx>
> Sent: Sat, July 24, 2010 4:28:35 AM
> Subject: Re: [TCML] Begining Tesla Coil Project
>
> Julius Crummer wrote:
>> Ok im beginning to build my Tesla Coil for a project. So far i only have a 6KV
>> 60A  NST..
>
> is that 60 mA?
>
> Is it a "solid state" NST? (which won't work)  or a conventional transformer
> style (which will)
>
>
>
> .will this be suitable to build a simple Tesla coil?
>
> Yes
>
>
> Also im working
>> on a budget and 7 wk deadline...is there like a simplified parts list or
>> substitutions i can make that will cut down the cost for other parts for this
>> project?
>>
>
>
> Transformer, capacitor, sparkgap, primary winding, secondary, topload..
>
> Use a beer bottle/bucket capacitor (cheap, but heavy)
> Use bare AWG12 or AWG14 wire as your primary, at least the first time.
> Metal dryer vent hose and a metal pie plate make a fine topload.
>
>
>
>>
>>
>>        _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla