RE: [TCML] obit needed & spheres for sale

[robert massa <massahbob@xxxxxxxxxxxxx>]

  i have a couple of obits, but rhey are 6000 v . will have to look into  the shipping, if you can use.
                   bob   
 

--- On Tue, 1/12/10, Lau, Gary <Gary.Lau@xxxxxx> wrote:


From: Lau, Gary <Gary.Lau@xxxxxx>
Subject: RE: [TCML] obit needed & spheres for sale
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Date: Tuesday, January 12, 2010, 6:29 AM


I don't believe I've ever heard of an OBIT in any voltage other than 10kV, and I've not heard of an NST above 15kV.  Are you sure you have the 18kV correct?

Regards, Gary Lau
MA, USA

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
> Behalf Of tesla@xxxxxxxxxxxxxx
> Sent: Tuesday, January 12, 2010 1:06 AM
> To: Tesla Coil Mailing List
> Subject: [TCML] obit needed & spheres for sale
> 
> Hello All:
> 
> I have a current project that requires another oil burning ignition transformer
> (obit). I need one from 18 to 20kv. The original piece from 1960 is preferable.
> The new one (18kV) blew and I would like to find a robust unit.
> 
> Needed a.s.a.p.
> 
> John Cooper
> (949) 701-0005, anytime (p.s.t.)
> 
> p.s. I still have bunches of cu and al spheres from 2" to 8" and caps and other
> stuff, call me.
> 
> Here's a photo of a current project.
> 
> JC
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla