[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] 3 tube gap photos



Hi Jim

That must have taken some serious feeler gauge work^3. It is cool rather
than other designs. I like the simplicity.

Most of the tube gaps I have made have sucked and I don't mean in the vacuum
sense;-^. I have a beautiful tungsten tower series gap now. Way easy to set,
and very easily set accurate! I'll post a picture after I have the top edges
machined to be rounded (corona concern maybe not will mot even be even
needed as the gap is the lowest resistance). Now why didn't I think of that
ahead of time? There are 10 Tungsten 2" x 1/4 in 1.5" aluminum towers and
1.5" copper strap based series connections at the bottom. It works great
with a blower. I won't ever look back to fiddling with tube gaps!

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Jim Lux
Sent: Tuesday, February 23, 2010 5:05 PM
To: tesla@xxxxxxxxxx
Subject: [TCML] 3 tube gap photos

Took some pictures of my three tube gap.

http://home.earthlink.net/~jimlux/hv/images/tubegap1x.jpg

black thing in background is a muffin fan.

http://home.earthlink.net/~jimlux/hv/images/tubegap3x.jpg
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.733 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10
11:34:00

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla