RE: [TCML] Wire recommendation for new secondary

["Lau, Gary" <Gary.Lau@xxxxxx>]

My coil uses a 15/60 NST, Sync RSG, and .04uF cap.  I use a 6.25" x 26" 28AWG secondary.  This high inductance forces me to also use a large topload and primary inductance, which is a GOOD thing, efficiency-wise.

Regards, Gary Lau
MA, USA

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
> Behalf Of Craig
> Sent: Tuesday, February 23, 2010 7:16 PM
> To: tesla@xxxxxxxxxx
> Subject: [TCML] Wire recommendation for new secondary
> 
> Hi all,
> 
> 
> 
> I am winding a new 6" x 30" secondary coil. What awg wire size would be
> preferred for this size coil? I have a 16K/65ma transformer which can handle
> more than its rated load for short periods.
> 
> 
> 
> Thanks,
> 
> 
> 
> Craig

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla