[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] DANGER Ground wire question (Need a straight answer)



I still don't think it would be prudent to recomend people to touch the
secondary ground wire- during operation I'm assuming.  What will happen?
Probably either nothing, or electrocution- two things NOT WORTH PURSUING.

I would advise against this, even though I have no idea what would happen.

On Sun, Feb 14, 2010 at 7:49 PM, Aron Koscho <kc5uto@xxxxxxxxx> wrote:

> No, it is not dangerous. If the coils ground wire goes from the base of the
> secondary straight to a ground rod it is fine to touch, it could even be
> bare (like most ground wires for radio). I am assuming the wire is at least
> 12ga, less than 100' long, and properly terminated.
>
> Aron
> www.hvguy.com
>
> On Sun, Feb 14, 2010 at 6:14 PM, Chris <carielles@xxxxxxx> wrote:
>
> > Thank you everyone for replying to my question. Unfortunately most of you
> > went right over my head. Can someone just give me a plain answer. Yes its
> > dangerous, or no its not dangerous. I will try some of the other
> solutions,
> > but first I just really want to confirm this because I already have
> > everything made. Thanks again, and sorry for my noobishness. You gotta
> start
> > somewhere.
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla