Heres the completed coil with secondary wounded. Only thing stopping me from
plugging it in is the variac which im waiting for. Some quick specs: NST:
6KV/60ma, 8 turns of primary 1/4" tubing for outer dia of 17", secondary i used
a 1,000 ft roll about 900-1000 turns 28awg, its 22" tall 3.5" diameter all the
red wires are 14awg, 6 Cornell Dubilier .015uF 2KV capacitors, a topload of a
dryer venting 14.5" outer diameter, 2' X 2' aluminum sheet for counterpoise
under, 7 tubes of copper with A/C powered fan for static gap, and three bolts
for a safety gap. Well thats it in a nutshell and whatever u see in the pic.
Thanks for all you guys help and advice :)
http://www.flickr.com/photos/39213193@N03/4875212284/
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla