[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Charging inductor



Neither - just leave the primaries open circuited. Terry Fritz found that a typical MOT was about 38 Henry and 69 ohms. Some folks have cut off the "I" section and added an air gap between the E and I sections to prevent saturation.

Bert

jhowson4@xxxxxxxxxxx wrote:
I take it that you cut the primarys off the MOT or do you just short it.

Thanks,
John "Jay" Howson IV

----- Original Message -----
From: "jimlux"<jimlux@xxxxxxxxxxxxx>
To: "Tesla Coil Mailing List"<tesla@xxxxxxxxxx>
Sent: Monday, August 9, 2010 9:29:55 AM
Subject: Re: [TCML] Charging inductor

S&JY wrote:
Jim,

If you are looking for a charging reactor for a DC system, then two to four
MOT secondaries in series works fine.

Tnx..


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla





_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla