[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] pics of new coil

Thanks, the tap points are wire brads, #17x1-1/4". I loosen the set screw on the mechanical lug and push the brad trough the insulation,
 then re tighten the set screw. You can do it with your fingers,
 goes in fairly easy, but i prefer using needle nose pliers to
 make sure it's in there good.
Norm,
Demotte, IN


      
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla