[TCML] New Flux Concentration Magnifier Primary

[David Sharpe <sparktron01@xxxxxxxxx>]

Present status can be seen at http://drop.io/Sparktron01

Flux Concentration Primary.xls

All parts are rough cutout except IDR aluminum components
which should be plasma cut and welded together next week.
I have 125' (40m) of 1/4" CU tubing for both primary pairs
and two 5 flute insulators for HV input into system.

Still have to finalize secondary length and wire compliment, but
I do have a 40" cutoff of sch40 8" PVC, only need to cutoff
square to appropriate length.

Will measure IDR impedance with a 10A DLRO set used for
testing power CB's and will test complete assembly by injection
of up to 1kA into primaries, and measure Kelvin voltage drop
across IDR radial slot.  IDR current is then Vkel / Ridr.

-- 
Dave Sharpe, TCBOR/HEAS
Chesterfield, VA USA

Sharpe's Axiom of Murphy's Law
"Physics trumps opinion!"
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla