[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] secondary corona ring... adivse needed



Go to a craft store like AC moore or something and they should have little foam toroids of about the size you need. just cover them with really thin strips of aluminum duct tape then smooth it over with a spoon or something. I hot glued a thin piece of circular acrylic covered in alumium into the center to connect it to the top of the seconday, then just made sure to use more tape to complete the electrical connection between the 2 pieces. 

Have fun, 
Jay Howson 



----- Original Message ----- 
From: "mike osipowicz" <yosip1115@xxxxxxxxxxx> 
To: "tesla request pupman" <tesla@xxxxxxxxxx> 
Sent: Wednesday, September 23, 2009 8:50:57 PM GMT -05:00 US/Canada Eastern 
Subject: [TCML] secondary corona ring... adivse needed 


hello everybody, I searched the forums, but did not find what I am looking for. my 4 inch coil seems to be working pretty well, Im still waiting for my second NST, and more caps to come in... until then... I am getting corona from the top of my secondary windings, although it looks very cool, it cannot stay. my toroid is 4 inch dryer duct, wrapped with AL tape, nicely smoothed, almost professional! I need a corona ring, sitting right above the secondary windings, right? I am looking for something that is about 1 inch diameter, does dryer ducting come in this size? I love the look of a high toroid, but my secondary does not... thanks, Mike o. 
_________________________________________________________________ 
Bing™ brings you maps, menus, and reviews organized in one place. Try it now. 
http://www.bing.com/search?q=restaurants&form=MLOGEN&publ=WLHMTAG&crea=TEXT_MLOGEN_Core_tagline_local_1x1_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla