Re: [TCML] Pig based coil design.

[gary350@xxxxxxxxxxxxx]

Ok.... what exactly are you looking for.  Plans you can copy?

Here is a link to my 10" coil.  Secondary is 950 turns of #18 enamel coated copper wire close wound on a 10" diameter PVC pipe.  Secondary coil has 3 coats of polyurthane.  Primary coil flat would 1/4" copper tubing 1/2" spacing with strike rail.  Variable speed vacuum fan RQ spark gap.  Capacitor is .035 uf 40K volts. The coil produces 12 foot arcs on about 12KW at 14,000. volts.  The variac tunes the spark gap to the exact speed to get maximum output.  I can dial in about 1 extra ft of output arc length with the spark gap vacuum fan speed control.

My suggestion is forget the rotary it is just a fancy over priced toy. Build a variable speed vacuum fan spark gap.  

http://home.earthlink.net/~gary350/tc10-4.jpg

I have a 15" diameter PVC pipe you can have it FREE if you come and get it in Murfreesboro TN 37129.  I have a truck load of other diameter PVC pipe 6", 8" and 10" it is all free to anyone that will come and get it.







-----Original Message-----
>From: Travis Tabbal <travis@xxxxxxxxxx>
>Sent: Nov 5, 2009 10:58 AM
>To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
>Subject: [TCML] Pig based coil design.
>
>I was wondering if someone had a JavaTC file they would be willing to share
>for a chicken based coil. I was thinking secondary diameter in the 12"-24"
>range. The chicken is 14.4Kv 10KVA. The gap will be rotary, not yet designed.
>_______________________________________________
>Tesla mailing list
>Tesla@xxxxxxxxxx
>http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla