[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] NST coil question

To: tesla@xxxxxxxxxx
Subject: [TCML] NST coil question
From: Andrew Robinson <teslamad@xxxxxxx>
Date: Tue, 19 May 2009 02:21:34 -0400
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx
User-agent: Thunderbird 2.0.0.21 (Windows/20090302)

For a 12kv 30ma coil with a secondary approximately 4" x 22" (windings),should I use a 3" x 12" spun toroid, or 4.5" x 18" spun toroid?

Also, when I run my calculations, for a MMC cap with a 12/30 NST mycapacitor should be .0066 uF, but I keep hearing others suggest .0093 uF?

See my calculations (2003 word document) here:http://host.atomiklan.com/tesla/Noname.doc<http://host.atomiklan.com/tesla/Noname.doc>


Thanks for the help... Its been awhile since i've done this stuff.

Regards,
Andrew
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] NST coil question
  - From: Quarkster

Prev by Date: [TCML] Threadkill/reset: The current record holders
Next by Date: [TCML] HUGE TESLA STUFF SALE
Previous by thread: [TCML] Threadkill/reset: The current record holders
Next by thread: Re: [TCML] NST coil question
Index(es):
- Date
- Thread