[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] New Geek Group Video - How To Phase NSTs



I could be wrong (it happens with impressive regularity) but I remember
being told back in the dark ages that if they don't have similar current
ratings that they would load unevenly and it was to be avoided when
possible. Never made much sense to me (give that they're current limited)
but it just stuck in my head.

-----Original Message-----
From: Lau, Gary [mailto:Gary.Lau@xxxxxx] 
Sent: Tuesday, March 31, 2009 13:09
To: Tesla Coil Mailing List
Subject: RE: [TCML] New Geek Group Video - How To Phase NSTs

Hi Chris,

You mentioned in the Part 1 video that when paralleling NST, both should
have the same current rating.  What's the basis for this?  I don't think
that this matters.

Regards, Gary Lau
MA, USA


> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
> Behalf Of Chris Boden
> Sent: Sunday, March 29, 2009 8:56 PM
> To: 'Tesla Coil Mailing List'
> Subject: [TCML] New Geek Group Video - How To Phase NSTs
> 
> http://www.youtube.com/watch?v=KSlQjw9OPG4
> part 1
> 
> http://www.youtube.com/watch?v=327eDUluub4
> part 2
> 
> Enjoy :)
> 
> 
> 
> Christopher A. Boden
> President / Founder
> The Geek Group
> www.thegeekgroup.org
> Because the Geek shall inherit the Earth!

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.0.238 / Virus Database: 270.11.31/2028 - Release Date: 03/31/09
06:02:00

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla