[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Considering a new coil build...



That's a pretty good deal. You're using one like it on a coil without
troubles? I've heard some of those Maxwell's aren't up to the task.


On Thu, Mar 26, 2009 at 3:52 PM, Dave Leddon <dave@xxxxxxxxxx> wrote:

> Or you could just buy this:
>
> http://cgi.ebay.com/MAXWELL-LABS-40kv-09uf-HI-VOLTAGE-CAPACITOR-TESLA_W0QQitemZ190296005944QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item190296005944&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50<http://cgi.ebay.com/MAXWELL-LABS-40kv-09uf-HI-VOLTAGE-CAPACITOR-TESLA_W0QQitemZ190296005944QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item190296005944&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50>
>
> This is what I use on a 10Kva 14.4Kv coil.
>
> Dave
> Pleasanton, ca
>
>  I'm starting to think that a real pulse cap might be the way to go. Dr.
>> Resonance has emailed me some information on an amazing cap that would be
>> great. It's a little expensive though, so I'm going to have to save up for
>> a
>> while. I was going to build the MMC for a lower voltage, as I think I did
>> 24kV with a 15kV NST. But thinking about it, I can see that isn't going to
>> work. I'd be really irritated if I blew up my MMC after soldering all that
>> together.
>>
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla