Re: [TCML] 1 Mhz ,1 kw

[DC Cox <resonance@xxxxxxxxxxxx>]

Very small sphere or toroid.  2" dia sec wound with #36 AWG double build
wire.  Hyperbaric spark gap.  RF transmitting caps, not MMC type.

If you drop me your tel number offlist, I can run the design for you in
JAVATC which will provide accurate answers.

Dr. Resonance




On Sun, Mar 22, 2009 at 6:30 PM, Roger Smith <rwsmith@xxxxxxxxxxxxxx> wrote:

> If you are successful,  it might be interesting to see how well you can
> pick it up with an AM radio.
>
> Roger
> ----- Original Message ----- From: "Dex Dexter" <dexterlabs@xxxxxxxxxxx>
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
> Sent: Saturday, March 21, 2009 5:46 AM
> Subject: [TCML] 1 Mhz ,1 kw
>
>
>
>>
>> I'm considering making a very high frequency (spark gap type) coil with
>> decent power level.
>> Resonant frequency at least 1 Mhz and power input about 1000 W.
>> Can someone give me advice and recommend design parameters for this?
>> Thanks.
>>
>> Dex
>>
>> _____________________________________________________________
>> Washington DC's Largest FREE Email service. ---> http://www.DCemail.com<http://www.dcemail.com/>---> A Washington Online Community Member --->
>> http://www.DCpages.com <http://www.dcpages.com/>
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla