[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] JAVATC PFC Query



Hey Phil...

Assuming that you have the 3 NST's in paralell and the line feeding them would see the current/voltage phase shift in total, I would put the 86 uF caps in line before the load... for some reason, I feel that if you put the 30ish uF caps on each trannie, each sucsecive trannie will impact the next in line... but thats just my theory....
see what the other members have to say before taking my advice ;)

Scot D



Phil Tuck wrote:

Hello.

JavaTc gives the PFC value that is required based on the transformer
information you have entered. In my case I have entered 10,000v 150 m/a and
it gives 86uF (240 volts (50hz). But I am not using one single transformer
supplying this, as the program presumes. Instead I have three NST's each of
50m/a in parallel. So do I put a 86uf across the three ? or single 29uF caps
across each NST? Or either?



Regards

Phil









_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla