[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Sangamo and MMC in VTTC



Hi All,

 

I am scavenging parts for my (4x) 833c 6" coil. I am trying to keep the freq
at ~ 350khz. That requires a .003uf or slightly less in my design. I have on
hand a Sangamo type G2 (3.125" diameter x 3" high)(dual oval aluminum end
plates) @ .003uf, 12amps, @ 8kv PWKG voltage. Will this stand up to this
abuse? I have my Mongo transformer working for multiplier or CW for audio
fun. The phenolics I rat holed are leaking :-(

 

I also have (120) Panasonic  ECW-H .0082uf @ 2000 which as an MMC would make
strings 18 long * 7 strings =~ .003uf. I couldn't get a realistic current
out of Classic Tesla MMC. Does anyone know what the max current would be for
7 strings? I imagine these will run just fine at 350Khz without getting hot.
Direction to take would be a good thing. Sangamo's are getting hard to find.
I wish I had bought 4 several years ago to stack and parallel!

 

Thanks,

Jim Mora

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla