[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Topload Refurbishment Idea



Hi all,

My flex-duct and aluminum duct tape covered 12x56 toroid 
topload for my bit coil had collecting a pretty good number
of "battle scars" after several years of use and abuse, so I
decided to try something to refurbish it. Since it was going 
to certainly be over my budget to replace it with a spun to-
roid of that magnitude, I decided to try the alternating strips
of aluminum valley roof flashing approach. Although it took 
several hours of maticulous marking and cutting out the in-
dividual strips, then fastening each strip to the torus until it
was completely covered, I was pretty pleased with the out-
come and thought that I would share my idea and results 
with others that are looking for fresh ideas on toroid refur-
bishment:

http://www.flickr.com/photos/33464569@N05/3766648290/
http://www.flickr.com/photos/33464569@N05/3766662806/
http://www.flickr.com/photos/33464569@N05/3765877471/

David Rieben
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla