Re: [TCML] ARSG Materials continued

[Finn Hammer <f-h@xxxx>]

Andrew Robinson skrev:
> Ok... thanks for all your replies... but now I have conflicting 
> opinions. One says yay Al and another says boo Al. Can you guys show 
> some supporting data so I can make the final decision on which 
> material to use. FYI in case you didnt look at our engineering 
> diagrams, the Al will only be used for the conducting ring and 
> electrode supports. The actual electrode electrodes are .25" tungsten. 
> Look at the diagrams and note the materials at the bottom of the 
> designs. Thanks, Andrew
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
Andrew,

Don´t expect concord. 
In time, you will find out what guidance to trust and what to ignore.
But let me suggest you check out the websites of the contestants, then 
decide which advise you would trust.....
Or do an experiment and become the master of your own knowledge.  :-)

Cheers, Finn Hammer
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla