Re: [TCML] x-ray transformer

[Frosty <frosty90@xxxxxxxxx>]

you would need to rectify the output to charge the tank capacitor, and 60kv
is a bit too high
, but if you could run it at say 15kv or so with a rectified output it could
be a good power supply.


On Fri, Feb 27, 2009 at 11:38 AM, John Darwin Powers <jdp3@xxxxxxxxxxx>wrote:

> Hello,
>
> I have come across a transformer removed from a x-ray defraction system.
>  It was made by Rich Seifert & Co. of Germany, now part of GE sensor
> systems.  The specifications are 60kV, 80mA, 3.5kW, at 20kHz.  It is in mit
> condition and is water cooled.  Is this a "good thing" for Tesla coil
> building?  Have the IGBT driver for it, and am figuring out how it works.
>
> Thanks.
>
> John
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla