[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] triac or scr choice

Nearly any SCR or triac will work.  Look for one with at least a 200V
standoff, and a rating of five amps or so.  Personally, I use over-sized
components.  This allows me to use an SCR that has a threaded stud on it,
which makes mounting far easier.

On Wed, Feb 25, 2009 at 06:29, Christoph Bohr <cb@xxxxxxxxxxxxxxx> wrote:

> Hello everyone..
>
> which type of triac or similar device should one use in
> conjunction with a VTTC staccato controller?
> I have found the shematic at the eastern voltage research
> homepage and was wondering what kind of device I could use
> to swith the cathode of a tube around 1KVA
>
> Any suggestions are appreciated.
>
> regards
>
> Christoph Bohr
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla