[TCML] Resistant Spark Gap

[Brandon Hendershot <mrbrandman@xxxxxxx>]

I found a link someone put up on the list of site that sells brass  
balls for pretty cheap. I ordered a few for my spark gap and soon to  
come Terry Filter. The problem is, the gap needs to be half the size  
it was before in order to fire. Is it because the electrodes are now  
round and have less of a preferance of where to arc to? Or are they  
acting like a resistor on the high voltage?

Other things I've changed are the connecting wires and the screws  
since I needed bigger ones for the balls to screw on to. But I've  
checked the resistance with an ohmeter and they are the same... Any  
words on this?

Thanks a lot, guys.
Brandon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla