[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Re: Polyurethane question:

I've always simply used dish soap and water with a sponge and then use clean water following to remove any residue. Towel dry. Ready to go in a couple minutes. 
Take care,
Bart

Jerry Boman wrote:

Denatured alcohol could bite into the finish enough to dull it but you
should be safe to use mineral spirits or just good ol windex applied to the
rag first will do to. Take care, Jerry

On Wed, Apr 22, 2009 at 7:21 AM, <tesla-request@xxxxxxxxxx> wrote:

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla