[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Tube question
What did you glue the resistor to, metal, plastic or wood? Can you use a cutting disk on a Dremel to cut away the epoxy?
Adam
--- On Sun, 9/21/08, David Rieben <drieben@xxxxxxxxxxx> wrote:
> From: David Rieben <drieben@xxxxxxxxxxx>
> Subject: Re: [TCML] Tube question
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
> Date: Sunday, September 21, 2008, 5:04 PM
> Ed,
>
<snip>
> However, I epoxied the
> resistor
> down to the base and the epoxy has also glued down the
> "ring"
> of the slide tap so I would almost certainly destroy the
> resistor
> by trying to unglue it and vary the tap.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla