[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TCML] Soldering SISG heat sinks
Really feel pretty stupid asking this but not sure where else I can
Have built 4 of Mark Dunns awesome SISG boards and am having an awful
time trying to solder the heat sinks to the board.... Is there a trick
to this besides getting some huge wattage soldering iron? Pads and heat
sink posts are clean and am using a flux pen for the flux.... Would I
put the components at risk if I don't solder these down?
Any thoughts would be most welcome.....
The folly of mistaking a paradox for a discovery, a metaphor for a
proof, a torrent of verbiage for a spring of capital truths, and oneself
for an oracle, is inborn in all of us. -Paul Valery, poet and
* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual or entity to whom they are addressed. Please do not copy it or use it for any purposes, or disclose its contents to any other person. Further, this e-mail and any associated files may be confidential and further may be legally privileged. This email is from the Invensys Process Systems business unit of Invensys plc which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within the Invensys Process Systems business group, please click here http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
If you have received this e-mail in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Thank you for your co-operation. You may contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates).
Tesla mailing list