RE: [TCML] Variac

["Richard Schmuke" <rdj@xxxxxxxxxxxx>]

Look up "step start" in reference to a power supply, almost all ham radio
amps and power supplies  have a step start due to the large filter
capacitors. You will find many ideas to work with what you may already have
in your "junk box". If you have a electronics surplus store handy you can
find a short time delay starting relay for a dollar or two that would work.

Rich , KDØZZ
Disclaimer: Any errors in spelling or facts are transmission errors.




-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Tesla
Sent: Wednesday, October 29, 2008 10:00 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Variac

At 02:41 2008-10-29, you wrote:

>--=======AVGMAIL-4908787F0000=======
>

Hi.

Although this is a nice description it would be nice with a schematic 
as I am a little
curious of how to wire the A1 and A2 connections(the relay winding) 
of the contactor
in this setup.

Regards
/Matt 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla