[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Panasonic .056Uf MMC (Terry's early prefered cap choice)

Hi List,

 

I have 2 banks of .056uf x16 (25.6KV) x3 ~=.01UF@ 25.6KV double sided or
.02uf total. These are mounted on g10 or equiv perf board PCB's from
Digikey. This would be an ideal setup for a 15KV 60ma Neon or? They have
extended lead length as Terry did on his prototype and twist and solder
bleed resistors. The two boards are mounted with standoffs on either side of
a PE cut board (voltage paralleled) to be mounted in any dimension,
vertically will afford the best cooling. These have seen very little use.  

 

I have gone to Maxwell's and General Atomics as my coils grew up ;-))

 

Please contact me off list if interested.

 

Jim Mora

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla