Re: [TCML] PFC Question (again)

[FutureT@xxxxxxx]

In a message dated 5/24/2008 10:12:05 A.M. US Eastern Standard Time,  
deano@xxxxxxxxxxxxxxxx writes:

I run a  sync rotary gap, and usually with my 16nF MMC. That is resonant 
mode. 
Has  run many hours over the years with no Terry filter, just a horn gap made 
 
of two spoons hammered out of some sheet copper directly across the  rotary. 
My input VA gives me a Freau factor close to 1.9, so my power  factor must be 
pretty good.


Deano,
 
My results agree.  When I ran a 120 bps sync rotary PT powered coil in 
resonant mode or near resonant mode, the power factor was excellent.  
I did a number of such experiments back then, I don't remember all the  
details
offhand.  I posted my results at the time.  
 
Cheers,
John



**************Get trade secrets for amazing burgers. Watch "Cooking with 
Tyler Florence" on AOL Food.      
(http://food.aol.com/tyler-florence?video=4&?NCID=aolfod00030000000002)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla