Mark Lock wrote:
There is no need of any preparation. Acrylic is an excellent insulator. You may polish the parts after cutting them for better appearance. Leave about 2 cm of insulation between the coil and other parts.Hi all. I've been slowly building my first TC for a while now and I've recently acquired my coil form, a nice piece of acrylic. My question is what do I need to do to prepare it for winding? I've read that it should be cleaned with a solvent, sanded, dried and varnished among others, but is that all necessary? My transformer is 12KV 30mA if that's any indication of how much insulation is required.
Antonio Carlos M. de Queiroz _______________________________________________ Tesla mailing list Tesla@xxxxxxxxxxxxxx http://www.pupman.com/mailman/listinfo/tesla