Re: [TCML] Re: having problems with vttc tuning...

["Billy Watson" <aesops.tech@xxxxxxxxx>]

In your photos, it looks like your strike ring, is a one turn coil, or a
shorted one turn coil of the secondary. It should not be a completed turn.

On Sun, Mar 16, 2008 at 2:24 PM, giorgio a. di donfrancesco <
giorgiodidon@xxxxxxxxx> wrote:

> hi all, thank you for your answers.
> i tried  to do everything you suggested but nothing.
> i tested the tube, no short between filament and grid
> and between grid and anode. so i assume the tube is ok (!?).
> what about grid leak resistor, maybe 1400ohms is too weak?
> do you thing that trying with bigger one will work?
> in this
> http://www.stevehv.4hv.org/VTTC2.htm
> vttc steve uses a 10kohm grid leak resistor...
>
> i doubled the mot also.
>
> thank you
> giorgio
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla