[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TCML] Polishing Lexan (small, recessed areas)
Need some expert opinions on polishing lexan.
Basically, i'm looking to polish small recessed pockets that have been
machined into blocks of lexan. For example, a 2"x2" pocket, 0.5" deep.
Not too keen about flame polishing, especially on a part that will take
a long time to machine. Although i have read that MEK solvent is
something frequently used or a plastic polishing compound such as NOVUS.
Tesla mailing list