RE: [TCML] 4.1 MFD Cap

[William Noble <william_b_noble@xxxxxxx>]

those are motor capacitors, they are not suitable in general for mmc though it could be fun to try - to get to 15KV you would need at least 50 of them right (300X 50 = 15,000) - that will probably also be relatively expensive compared to other types of capacitors.> Date: Tue, 17 Jun 2008 17:36:08 -0400> From: jmatoknoon@xxxxxxxxx> To: tesla@xxxxxxxxxx> CC: > Subject: [TCML] 4.1 MFD Cap> > I was browsing one of my favorite websites (SciPlus) and came across some> 4.1 MFD Caps. Here's the link and the listing.> <http://www.sciplus.com/category.cfm/subsection/17/category/166> (halfway> down the page)> *A 4.1 MFD 300 VAC capacitor. Only 1-5/8" long x 3/4" dia., the MGT-67A P.C.> mount capacitor has a resistor mounted on its side.*> > If I strung a number of these together, would they work as an MMC?> > John Matok> _______________________________________________> Tesla mailing list> Tesla@xxxxxxxxxxxxxx> http://www.pupman.com/mailman/listinfo/tesla_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla