[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Depotting Epoxy NST



Yup, waste of time for epoxy.
Use to remove epoxy chemically, it works great but it removes the varnish off wires and will eat anything plastic or phenolic too.
Frank

At 02:07 PM 6/6/2008 -0500, you wrote:
almost impossible to remove the epoxy without using exotic solvents that will make the whites of your eyes turn some weird color.... as my memory fails me from using not so weird exotic solvents... i think there is some type of methyl based solvent that can "soften" the epoxy but Im not too sure what it will do to the insulation on the wire.... someone out there knows the answer it will show up soon

Scot D


Phillip Slawinski wrote:

I have a 15/30 Transco that's potted in epoxy.  I'm wondering if
anyone knows how to depot these, or if I'm wasting my time trying.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla




_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla